SNCR for Low NO x Emissions – Case Study of a Swedish Waste-to-Energy Plant –
All over the world people understand that reducing air pollution is essential to increase health and comfort of people. Nitrogen oxides (NO x ) are among the main components of pollutants caused by combustion processes. It is toxic by direct contact and it causes acid rain.
Therefore, most governments regulate the emission of nitrogen
oxides in flue gas from plants of all kind by law and/or financial incentives.
NO x reduction by Selective Non Catalytic Reaction (SNCR)
is next to the Selective Catalytic Reaction (SCR) the most common way to reduce
NO x in flue gases. During the past years, the efficiency
of SNCR Technology could be increased in such a way that it is possible to
reduce NO x by more than 70 percent in
conventional Waste-to- Energy units. In addition, the application range of
SNCR has been extended even for larger combustion plants due to ongoing
developments. Today, it is one of the best available technologies for NO x control in many
countries world-wide. Within this paper, a new high performance SNCR
application being installed at a Swedish Waste-to-Energy plant will be
presented including operational experiences and lessons learnt due to the
specifics of this plant.
Autor(en)
Dr.-Ing. Wolfgang Schüttenhelm, Philip Reynolds
Contentpartner
© Thomé-Kozmiensky Verlag GmbH
Publikation
Waste Management, Volume 5 (Dezember 2015)
Verkaufspreis
€ 5,00 oder im Premium-Abonnement enthalten